  ##############################################################################
 #                                                                            ##
############################################################################## #
#                                                                            # #
#                          Generic Policy file                               # #
#                               V1.2.0rh                                     # #
#                            August 9, 2001                                  # #
#                                                                            ##
##############################################################################


  ##############################################################################
 #                                                                            ##
############################################################################## #
#                                                                            # #
# This is the example Tripwire Policy file.  It is intended as a place to    # #
# start creating your own custom Tripwire Policy file.  Referring to it as   # #
# well as the Tripwire Policy Guide should give you enough information to    # #
# make a good custom Tripwire Policy file that better covers your            # #
# configuration and security needs.  A text version of this policy file is   # #
# called twpol.txt.                                                          # #
#                                                                            # #
# Note that this file is tuned to an 'everything' install of Red Hat Linux.  # #
# If run unmodified, this file should create no errors on database           # #
# creation, or violations on a subsiquent integrity check.  However, it is   # #
# impossible for there to be one policy file for all machines, so this       # #
# existing one errs on the side of security.  Your Linux configuration will  # #
# most likey differ from the one our policy file was tuned to, and will      # #
# therefore require some editing of the default Tripwire Policy file.        # #
#                                                                            # #
# The example policy file is best run with 'Loose Directory Checking'        # #
# enabled. Set LOOSEDIRECTORYCHECKING=TRUE in the Tripwire Configuration     # #
# file.                                                                      # #
#                                                                            # #
# Email support is not included and must be added to this file.              # #
# Add the 'emailto=' to the rule directive section of each rule (add a comma # #
# after the 'severity=' line and add an 'emailto=' and include the email     # #
# addresses you want the violation reports to go to).  Addresses are         # #
# semi-colon delimited.                                                      # #
#                                                                            ##
##############################################################################



  ##############################################################################
 #                                                                            ##
############################################################################## #
#                                                                            # #
# Global Variable Definitions                                                # #
#                                                                            # #
# These are defined at install time by the installation script.  You may     # #
# Manually edit these if you are using this file directly and not from the   # #
# installation script itself.                                                # #
#                                                                            ##
##############################################################################

@@section GLOBAL
TWROOT=;
TWBIN=;
TWPOL=;
TWDB=;
TWSKEY=;
TWLKEY=;
TWREPORT=;
HOSTNAME=;

@@section FS
SEC_CRIT      = $(IgnoreNone)-SHa ;  # Critical files that cannot change
SEC_SUID      = $(IgnoreNone)-SHa ;  # Binaries with the SUID or SGID flags set
SEC_BIN       = $(ReadOnly) ;        # Binaries that should not change
SEC_CONFIG    = $(Dynamic) ;         # Config files that are changed infrequently but accessed often
SEC_LOG       = $(Growing) ;         # Files that grow, but that should never change ownership
SEC_INVARIANT = +tpug ;              # Directories that should never change permission or ownership
SIG_LOW       = 33 ;                 # Non-critical files that are of minimal security impact
SIG_MED       = 66 ;                 # Non-critical files that are of significant security impact
SIG_HI        = 100 ;                # Critical files that are significant points of vulnerability


# Tripwire Binaries
(
  rulename = "Tripwire Binaries",
  severity = $(SIG_HI)
)
{
  $(TWBIN)/siggen                      -> $(SEC_BIN) ;
  $(TWBIN)/tripwire                    -> $(SEC_BIN) ;
  $(TWBIN)/twadmin                     -> $(SEC_BIN) ;
  $(TWBIN)/twprint                     -> $(SEC_BIN) ;
}

# Tripwire Data Files - Configuration Files, Policy Files, Keys, Reports, Databases
(
  rulename = "Tripwire Data Files",
  severity = $(SIG_HI)
)
{
  # NOTE: We remove the inode attribute because when Tripwire creates a backup,
  # it does so by renaming the old file and creating a new one (which will
  # have a new inode number).  Inode is left turned on for keys, which shouldn't
  # ever change.

  # NOTE: The first integrity check triggers this rule and each integrity check
  # afterward triggers this rule until a database update is run, since the
  # database file does not exist before that point.

  $(TWDB)                              -> $(SEC_CONFIG) -i ;
  $(TWPOL)/tw.pol                      -> $(SEC_BIN) -i ;
  $(TWPOL)/tw.cfg                      -> $(SEC_BIN) -i ;
  $(TWLKEY)/$(HOSTNAME)-local.key      -> $(SEC_BIN) ;
  $(TWSKEY)/site.key                   -> $(SEC_BIN) ;

  #don't scan the individual reports
  $(TWREPORT)                          -> $(SEC_CONFIG) (recurse=0) ;
}


# Tripwire HQ Connector Binaries
#(
#  rulename = "Tripwire HQ Connector Binaries",
#  severity = $(SIG_HI)
#)
#{
#  $(TWBIN)/hqagent                     -> $(SEC_BIN) ;
#}
#
# Tripwire HQ Connector - Configuration Files, Keys, and Logs

  ##############################################################################
 #                                                                            ##
############################################################################## #
#                                                                            # #
# Note: File locations here are different than in a stock HQ Connector       # #
# installation.  This is because Tripwire 2.3 uses a different path          # #
# structure than Tripwire 2.2.1.                                             # #
#                                                                            # #
# You may need to update your HQ Agent configuation file (or this policy     # #
# file) to correct the paths.  We have attempted to support the FHS standard # #
# here by placing the HQ Agent files similarly to the way Tripwire 2.3       # #
# places them.                                                               # #
#                                                                            ##
##############################################################################

#(
#  rulename = "Tripwire HQ Connector Data Files",
#  severity = $(SIG_HI)
#)
#{
#   #############################################################################
#  ##############################################################################
#  # NOTE: Removing the inode attribute because when Tripwire creates a backup ##
#  # it does so by renaming the old file and creating a new one (which will    ##
#  # have a new inode number).  Leaving inode turned on for keys, which        ##
#  # shouldn't ever change.                                                    ##
#  #############################################################################
#
#  $(TWBIN)/agent.cfg                   -> $(SEC_BIN) -i ;
#  $(TWLKEY)/authentication.key         -> $(SEC_BIN) ;
#  $(TWDB)/tasks.dat                    -> $(SEC_CONFIG) ;
#  $(TWDB)/schedule.dat                 -> $(SEC_CONFIG) ;
#
#  # Uncomment if you have agent logging enabled.
#  #/var/log/tripwire/agent.log      -> $(SEC_LOG) ;
#}



# Commonly accessed directories that should remain static with regards to owner and group
(
  rulename = "Invariant Directories",
  severity = $(SIG_MED)
)
{
  /                                    -> $(SEC_INVARIANT) (recurse = 0) ;
  /home                                -> $(SEC_INVARIANT) (recurse = 0) ;
  /etc                                 -> $(SEC_INVARIANT) (recurse = 0) ;
}
  ################################################
 #                                              ##
################################################ #
#                                              # #
# File System and Disk Administration Programs # #
#                                              ##
################################################

(
  rulename = "File System and Disk Administraton Programs",
  severity = $(SIG_HI)
)
{
  /sbin/accton                         -> $(SEC_CRIT) ;
  /sbin/badblocks                      -> $(SEC_CRIT) ;
  /sbin/busybox                        -> $(SEC_CRIT) ;
  /sbin/busybox.anaconda               -> $(SEC_CRIT) ;
  /sbin/convertquota                   -> $(SEC_CRIT) ;
  /sbin/dosfsck                        -> $(SEC_CRIT) ;
  /sbin/debugfs                        -> $(SEC_CRIT) ;
  /sbin/debugreiserfs                  -> $(SEC_CRIT) ;
  /sbin/dumpe2fs                       -> $(SEC_CRIT) ;
  /sbin/dump                           -> $(SEC_CRIT) ;
  /sbin/dump.static                    -> $(SEC_CRIT) ;
  # /sbin/e2fsadm                        -> $(SEC_CRIT) ; tune2fs?
  /sbin/e2fsck                         -> $(SEC_CRIT) ;
  /sbin/e2label                        -> $(SEC_CRIT) ;
  /sbin/fdisk                          -> $(SEC_CRIT) ;
  /sbin/fsck                           -> $(SEC_CRIT) ;
  /sbin/fsck.ext2                      -> $(SEC_CRIT) ;
  /sbin/fsck.ext3                      -> $(SEC_CRIT) ;
  /sbin/fsck.minix                     -> $(SEC_CRIT) ;
  /sbin/fsck.msdos                     -> $(SEC_CRIT) ;
  /sbin/fsck.vfat                      -> $(SEC_CRIT) ;
  /sbin/ftl_check                      -> $(SEC_CRIT) ;
  /sbin/ftl_format                     -> $(SEC_CRIT) ;
  /sbin/hdparm                         -> $(SEC_CRIT) ;
  #/sbin/lvchange                       -> $(SEC_CRIT) ;
  #/sbin/lvcreate                       -> $(SEC_CRIT) ;
  #/sbin/lvdisplay                      -> $(SEC_CRIT) ;
  #/sbin/lvextend                       -> $(SEC_CRIT) ;
  #/sbin/lvmchange                      -> $(SEC_CRIT) ;
  #/sbin/lvmcreate_initrd               -> $(SEC_CRIT) ;
  #/sbin/lvmdiskscan                    -> $(SEC_CRIT) ;
  #/sbin/lvmsadc                        -> $(SEC_CRIT) ;
  #/sbin/lvmsar                         -> $(SEC_CRIT) ;
  #/sbin/lvreduce                       -> $(SEC_CRIT) ;
  #/sbin/lvremove                       -> $(SEC_CRIT) ;
  #/sbin/lvrename                       -> $(SEC_CRIT) ;
  #/sbin/lvscan                         -> $(SEC_CRIT) ;
  /sbin/mkbootdisk                     -> $(SEC_CRIT) ;
  /sbin/mkdosfs                        -> $(SEC_CRIT) ;
  /sbin/mke2fs                         -> $(SEC_CRIT) ;
  /sbin/mkfs                           -> $(SEC_CRIT) ;
  /sbin/mkfs.bfs                       -> $(SEC_CRIT) ;
  /sbin/mkfs.ext2                      -> $(SEC_CRIT) ;
  /sbin/mkfs.minix                     -> $(SEC_CRIT) ;
  /sbin/mkfs.msdos                     -> $(SEC_CRIT) ;
  /sbin/mkfs.vfat                      -> $(SEC_CRIT) ;
  /sbin/mkinitrd                       -> $(SEC_CRIT) ;
  #/sbin/mkpv                           -> $(SEC_CRIT) ;
  /sbin/mkraid                         -> $(SEC_CRIT) ;
  /sbin/mkreiserfs                     -> $(SEC_CRIT) ;
  /sbin/mkswap                         -> $(SEC_CRIT) ;
  #/sbin/mtx                            -> $(SEC_CRIT) ;
  /sbin/pam_console_apply              -> $(SEC_CRIT) ;
  /sbin/parted                         -> $(SEC_CRIT) ;
  /sbin/pcinitrd                       -> $(SEC_CRIT) ;
  #/sbin/pvchange                       -> $(SEC_CRIT) ;
  #/sbin/pvcreate                       -> $(SEC_CRIT) ;
  #/sbin/pvdata                         -> $(SEC_CRIT) ;
  #/sbin/pvdisplay                      -> $(SEC_CRIT) ;
  #/sbin/pvmove                         -> $(SEC_CRIT) ;
  #/sbin/pvscan                         -> $(SEC_CRIT) ;
  /sbin/quotacheck                     -> $(SEC_CRIT) ;
  /sbin/quotaon                        -> $(SEC_CRIT) ;
  /sbin/raidstart                      -> $(SEC_CRIT) ;
  /sbin/reiserfsck                     -> $(SEC_CRIT) ;
  /sbin/resize2fs                      -> $(SEC_CRIT) ;
  /sbin/resize_reiserfs                -> $(SEC_CRIT) ;
  /sbin/restore                        -> $(SEC_CRIT) ;
  /sbin/restore.static                 -> $(SEC_CRIT) ;
  /sbin/scsi_info                      -> $(SEC_CRIT) ;
  /sbin/sfdisk                         -> $(SEC_CRIT) ;
  /sbin/stinit                         -> $(SEC_CRIT) ;
  #/sbin/tapeinfo                       -> $(SEC_CRIT) ;
  /sbin/tune2fs                        -> $(SEC_CRIT) ;
  /sbin/unpack                         -> $(SEC_CRIT) ;
  /sbin/update                         -> $(SEC_CRIT) ;
  #/sbin/vgcfgbackup                    -> $(SEC_CRIT) ;
  #/sbin/vgcfgrestore                   -> $(SEC_CRIT) ;
  #/sbin/vgchange                       -> $(SEC_CRIT) ;
  #/sbin/vgck                           -> $(SEC_CRIT) ;
  #/sbin/vgcreate                       -> $(SEC_CRIT) ;
  #/sbin/vgdisplay                      -> $(SEC_CRIT) ;
  #/sbin/vgexport                       -> $(SEC_CRIT) ;
  #/sbin/vgextend                       -> $(SEC_CRIT) ;
  #/sbin/vgimport                       -> $(SEC_CRIT) ;
  #/sbin/vgmerge                        -> $(SEC_CRIT) ;
  #/sbin/vgmknodes                      -> $(SEC_CRIT) ;
  #/sbin/vgreduce                       -> $(SEC_CRIT) ;
  #/sbin/vgremove                       -> $(SEC_CRIT) ;
  #/sbin/vgrename                       -> $(SEC_CRIT) ;
  #/sbin/vgscan                         -> $(SEC_CRIT) ;
  #/sbin/vgsplit                        -> $(SEC_CRIT) ;
  /bin/chgrp                           -> $(SEC_CRIT) ;
  /bin/chmod                           -> $(SEC_CRIT) ;
  /bin/chown                           -> $(SEC_CRIT) ;
  /bin/cp                              -> $(SEC_CRIT) ;
  /bin/cpio                            -> $(SEC_CRIT) ;
  /bin/mount                           -> $(SEC_CRIT) ;
  /bin/umount                          -> $(SEC_CRIT) ;
  /bin/mkdir                           -> $(SEC_CRIT) ;
  /bin/mknod                           -> $(SEC_CRIT) ;
  /bin/mktemp                          -> $(SEC_CRIT) ;
  /bin/rm                              -> $(SEC_CRIT) ;
  /bin/rmdir                           -> $(SEC_CRIT) ;
  /bin/touch                           -> $(SEC_CRIT) ;
}

  ##################################
 #                                ##
################################## #
#                                # #
# Kernel Administration Programs # #
#                                ##
##################################

(
  rulename = "Kernel Administration Programs",
  severity = $(SIG_HI)
)
{
  /sbin/adjtimex                       -> $(SEC_CRIT) ;
  /sbin/ctrlaltdel                     -> $(SEC_CRIT) ;
  /sbin/depmod                         -> $(SEC_CRIT) ;
  /sbin/insmod                         -> $(SEC_CRIT) ;
  /sbin/insmod.static                  -> $(SEC_CRIT) ;
  /sbin/insmod_ksymoops_clean          -> $(SEC_CRIT) ;
  /sbin/klogd                          -> $(SEC_CRIT) ;
  /sbin/ldconfig                       -> $(SEC_CRIT) ;
  /sbin/minilogd                       -> $(SEC_CRIT) ;
  /sbin/modinfo                        -> $(SEC_CRIT) ;
  #/sbin/nuactlun                       -> $(SEC_CRIT) ;
  #/sbin/nuscsitcpd                     -> $(SEC_CRIT) ;
  /sbin/pivot_root                     -> $(SEC_CRIT) ;
  /sbin/sndconfig                      -> $(SEC_CRIT) ;
  /sbin/sysctl                         -> $(SEC_CRIT) ;
}

  #######################
 #                     ##
####################### #
#                     # #
# Networking Programs # #
#                     ##
#######################

(
  rulename = "Networking Programs",
  severity = $(SIG_HI)
)
{
  /etc/sysconfig/network-scripts/ifdown                  -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/ifdown-cipcb            -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/ifdown-ippp             -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/ifdown-ipv6             -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/ifdown-isdn             -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/ifdown-post             -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/ifdown-ppp              -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/ifdown-sit              -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/ifdown-sl               -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/ifup                    -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/ifup-aliases            -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/ifup-cipcb              -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/ifup-ippp               -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/ifup-ipv6               -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/ifup-isdn               -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/ifup-plip               -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/ifup-plusb              -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/ifup-post               -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/ifup-ppp                -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/ifup-routes             -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/ifup-sit                -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/ifup-sl                 -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/ifup-wireless           -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/network-functions       -> $(SEC_CRIT) ;
  /etc/sysconfig/network-scripts/network-functions-ipv6  -> $(SEC_CRIT) ;
  /bin/ping                            -> $(SEC_CRIT) ;
  /sbin/agetty                         -> $(SEC_CRIT) ;
  /sbin/arp                            -> $(SEC_CRIT) ;
  /sbin/arping                         -> $(SEC_CRIT) ;
  /sbin/dhcpcd                         -> $(SEC_CRIT) ;
  /sbin/ether-wake                     -> $(SEC_CRIT) ;
  #/sbin/getty                          -> $(SEC_CRIT) ;
  /sbin/ifcfg                          -> $(SEC_CRIT) ;
  /sbin/ifconfig                       -> $(SEC_CRIT) ;
  /sbin/ifdown                         -> $(SEC_CRIT) ;
  /sbin/ifenslave                      -> $(SEC_CRIT) ;
  /sbin/ifport                         -> $(SEC_CRIT) ;
  /sbin/ifup                           -> $(SEC_CRIT) ;
  /sbin/ifuser                         -> $(SEC_CRIT) ;
  /sbin/ip                             -> $(SEC_CRIT) ;
  /sbin/ip6tables                      -> $(SEC_CRIT) ;
  /sbin/ipchains                       -> $(SEC_CRIT) ;
  /sbin/ipchains-restore               -> $(SEC_CRIT) ;
  /sbin/ipchains-save                  -> $(SEC_CRIT) ;
  /sbin/ipfwadm                        -> $(SEC_CRIT) ;
  /sbin/ipmaddr                        -> $(SEC_CRIT) ;
  /sbin/iptables                       -> $(SEC_CRIT) ;
  /sbin/iptables-restore               -> $(SEC_CRIT) ;
  /sbin/iptables-save                  -> $(SEC_CRIT) ;
  /sbin/iptunnel                       -> $(SEC_CRIT) ;
  #/sbin/ipvsadm                        -> $(SEC_CRIT) ;
  #/sbin/ipvsadm-restore                -> $(SEC_CRIT) ;
  #/sbin/ipvsadm-save                   -> $(SEC_CRIT) ;
  /sbin/ipx_configure                  -> $(SEC_CRIT) ;
  /sbin/ipx_interface                  -> $(SEC_CRIT) ;
  /sbin/ipx_internal_net               -> $(SEC_CRIT) ;
  /sbin/iwconfig                       -> $(SEC_CRIT) ;
  /sbin/iwgetid                        -> $(SEC_CRIT) ;
  /sbin/iwlist                         -> $(SEC_CRIT) ;
  /sbin/iwpriv                         -> $(SEC_CRIT) ;
  /sbin/iwspy                          -> $(SEC_CRIT) ;
  /sbin/mgetty                         -> $(SEC_CRIT) ;
  /sbin/mingetty                       -> $(SEC_CRIT) ;
  /sbin/nameif                         -> $(SEC_CRIT) ;
  /sbin/netreport                      -> $(SEC_CRIT) ;
  /sbin/plipconfig                     -> $(SEC_CRIT) ;
  /sbin/portmap                        -> $(SEC_CRIT) ;
  /sbin/ppp-watch                      -> $(SEC_CRIT) ;
  #/sbin/rarp                           -> $(SEC_CRIT) ;
  /sbin/route                          -> $(SEC_CRIT) ;
  /sbin/slattach                       -> $(SEC_CRIT) ;
  /sbin/tc                             -> $(SEC_CRIT) ;
  #/sbin/uugetty                        -> $(SEC_CRIT) ;
  /sbin/vgetty                         -> $(SEC_CRIT) ;
  /sbin/ypbind                         -> $(SEC_CRIT) ;
}

  ##################################
 #                                ##
################################## #
#                                # #
# System Administration Programs # #
#                                ##
##################################

(
  rulename = "System Administration Programs",
  severity = $(SIG_HI)
)
{
  /sbin/chkconfig                      -> $(SEC_CRIT) ;
  /sbin/fuser                          -> $(SEC_CRIT) ;
  /sbin/halt                           -> $(SEC_CRIT) ;
  /sbin/init                           -> $(SEC_CRIT) ;
  /sbin/initlog                        -> $(SEC_CRIT) ;
  /sbin/install-info                   -> $(SEC_CRIT) ;
  /sbin/killall5                       -> $(SEC_CRIT) ;
  #/sbin/linuxconf                      -> $(SEC_CRIT) ;
  #/sbin/linuxconf-auth                 -> $(SEC_CRIT) ;
  /sbin/pam_tally                      -> $(SEC_CRIT) ;
  /sbin/pwdb_chkpwd                    -> $(SEC_CRIT) ;
  #/sbin/remadmin                       -> $(SEC_CRIT) ;
  /sbin/rescuept                       -> $(SEC_CRIT) ;
  /sbin/rmt                            -> $(SEC_CRIT) ;
  /sbin/rpc.lockd                      -> $(SEC_CRIT) ;
  /sbin/rpc.statd                      -> $(SEC_CRIT) ;
  /sbin/rpcdebug                       -> $(SEC_CRIT) ;
  /sbin/service                        -> $(SEC_CRIT) ;
  /sbin/setsysfont                     -> $(SEC_CRIT) ;
  /sbin/shutdown                       -> $(SEC_CRIT) ;
  /sbin/sulogin                        -> $(SEC_CRIT) ;
  /sbin/swapon                         -> $(SEC_CRIT) ;
  /sbin/syslogd                        -> $(SEC_CRIT) ;
  /sbin/unix_chkpwd                    -> $(SEC_CRIT) ;
  /bin/pwd                             -> $(SEC_CRIT) ;
  /bin/uname                           -> $(SEC_CRIT) ;
}

  ########################################
 #                                      ##
######################################## #
#                                      # #
# Hardware and Device Control Programs # #
#                                      ##
########################################
(
  rulename = "Hardware and Device Control Programs",
  severity = $(SIG_HI)
)
{
  /bin/setserial                       -> $(SEC_CRIT) ;
  /bin/sfxload                         -> $(SEC_CRIT) ;
  /sbin/blockdev                       -> $(SEC_CRIT) ;
  /sbin/cardctl                        -> $(SEC_CRIT) ;
  /sbin/cardmgr                        -> $(SEC_CRIT) ;
  /sbin/cbq                            -> $(SEC_CRIT) ;
  /sbin/dump_cis                       -> $(SEC_CRIT) ;
  /sbin/elvtune                        -> $(SEC_CRIT) ;
  /sbin/hotplug                        -> $(SEC_CRIT) ;
  /sbin/hwclock                        -> $(SEC_CRIT) ;
  /sbin/ide_info                       -> $(SEC_CRIT) ;
  #/sbin/isapnp                         -> $(SEC_CRIT) ;
  /sbin/kbdrate                        -> $(SEC_CRIT) ;
  /sbin/losetup                        -> $(SEC_CRIT) ;
  /sbin/lspci                          -> $(SEC_CRIT) ;
  /sbin/lspnp                          -> $(SEC_CRIT) ;
  /sbin/mii-tool                       -> $(SEC_CRIT) ;
  /sbin/pack_cis                       -> $(SEC_CRIT) ;
  #/sbin/pnpdump                        -> $(SEC_CRIT) ;
  /sbin/probe                          -> $(SEC_CRIT) ;
  /sbin/pump                           -> $(SEC_CRIT) ;
  /sbin/setpci                         -> $(SEC_CRIT) ;
  /sbin/shapecfg                       -> $(SEC_CRIT) ;
}

  ###############################
 #                             ##
############################### #
#                             # #
# System Information Programs # #
#                             ##
###############################
(
  rulename = "System Information Programs",
  severity = $(SIG_HI)
)
{
  /sbin/consoletype                    -> $(SEC_CRIT) ;
  /sbin/kernelversion                  -> $(SEC_CRIT) ;
  /sbin/runlevel                       -> $(SEC_CRIT) ;
}

  ####################################
 #                                  ##
#################################### #
#                                  # #
# Application Information Programs # #
#                                  ##
####################################

(
  rulename = "Application Information Programs",
  severity = $(SIG_HI)
)
{
  /sbin/genksyms                       -> $(SEC_CRIT) ;
  #/sbin/genksyms.old                   -> $(SEC_CRIT) ;
  /sbin/rtmon                          -> $(SEC_CRIT) ;
}

  ##########################
 #                        ##
########################## #
#                        # #
# Shell Related Programs # #
#                        ##
##########################
(
  rulename = "Shell Related Programs",
  severity = $(SIG_HI)
)
{
  /sbin/getkey                         -> $(SEC_CRIT) ;
  /sbin/nash                           -> $(SEC_CRIT) ;
  /sbin/sash                           -> $(SEC_CRIT) ;
}


  ################
 #              ##
################ #
#              # #
# OS Utilities # #
#              ##
################
(
  rulename = "Operating System Utilities",
  severity = $(SIG_HI)
)
{
  /bin/arch                            -> $(SEC_CRIT) ;
  /bin/ash                             -> $(SEC_CRIT) ;
  /bin/ash.static                      -> $(SEC_CRIT) ;
  /bin/aumix-minimal                   -> $(SEC_CRIT) ;
  /bin/basename                        -> $(SEC_CRIT) ;
  /bin/cat                             -> $(SEC_CRIT) ;
  /bin/consolechars                    -> $(SEC_CRIT) ;
  /bin/cut                             -> $(SEC_CRIT) ;
  /bin/date                            -> $(SEC_CRIT) ;
  /bin/dd                              -> $(SEC_CRIT) ;
  /bin/df                              -> $(SEC_CRIT) ;
  /bin/dmesg                           -> $(SEC_CRIT) ;
  /bin/doexec                          -> $(SEC_CRIT) ;
  /bin/echo                            -> $(SEC_CRIT) ;
  /bin/ed                              -> $(SEC_CRIT) ;
  /bin/egrep                           -> $(SEC_CRIT) ;
  /bin/false                           -> $(SEC_CRIT) ;
  /bin/fgrep                           -> $(SEC_CRIT) ;
  /bin/gawk                            -> $(SEC_CRIT) ;
  /bin/gawk-3.1.0                      -> $(SEC_CRIT) ;
  /bin/gettext                         -> $(SEC_CRIT) ;
  /bin/grep                            -> $(SEC_CRIT) ;
  /bin/gunzip                          -> $(SEC_CRIT) ;
  /bin/gzip                            -> $(SEC_CRIT) ;
  /bin/hostname                        -> $(SEC_CRIT) ;
  /bin/igawk                           -> $(SEC_CRIT) ;
  /bin/ipcalc                          -> $(SEC_CRIT) ;
  /bin/kill                            -> $(SEC_CRIT) ;
  /bin/ln                              -> $(SEC_CRIT) ;
  /bin/loadkeys                        -> $(SEC_CRIT) ;
  /bin/login                           -> $(SEC_CRIT) ;
  /bin/ls                              -> $(SEC_CRIT) ;
  /bin/mail                            -> $(SEC_CRIT) ;
  /bin/more                            -> $(SEC_CRIT) ;
  /bin/mt                              -> $(SEC_CRIT) ;
  /bin/mv                              -> $(SEC_CRIT) ;
  /bin/netstat                         -> $(SEC_CRIT) ;
  /bin/nice                            -> $(SEC_CRIT) ;
  /bin/pgawk                           -> $(SEC_CRIT) ;
  /bin/ps                              -> $(SEC_CRIT) ;
  /bin/rpm                             -> $(SEC_CRIT) ;
  /bin/sed                             -> $(SEC_CRIT) ;
  /bin/sleep                           -> $(SEC_CRIT) ;
  /bin/sort                            -> $(SEC_CRIT) ;
  /bin/stty                            -> $(SEC_CRIT) ;
  /bin/su                              -> $(SEC_CRIT) ;
  /bin/sync                            -> $(SEC_CRIT) ;
  /bin/tar                             -> $(SEC_CRIT) ;
  /bin/true                            -> $(SEC_CRIT) ;
  /bin/usleep                          -> $(SEC_CRIT) ;
  /bin/vi                              -> $(SEC_CRIT) ;
  /bin/zcat                            -> $(SEC_CRIT) ;
  /bin/zsh                             -> $(SEC_CRIT) ;
  #/bin/zsh-4.0.2                       -> $(SEC_CRIT) ;
  /sbin/sln                            -> $(SEC_CRIT) ;
  /usr/bin/vimtutor                    -> $(SEC_CRIT) ;
}

  ##############################
 #                            ##
############################## #
#                            # #
# Critical Utility Sym-Links # #
#                            ##
##############################
(
  rulename = "Critical Utility Sym-Links",
  severity = $(SIG_HI)
)
{
  #/sbin/askrunlevel                    -> $(SEC_CRIT) ;
  /sbin/clock                          -> $(SEC_CRIT) ;
  #/sbin/fixperm                        -> $(SEC_CRIT) ;
  /sbin/fsck.reiserfs                  -> $(SEC_CRIT) ;
  #/sbin/fsconf                         -> $(SEC_CRIT) ;
  /sbin/ipfwadm-wrapper                -> $(SEC_CRIT) ;
  /sbin/kallsyms                       -> $(SEC_CRIT) ;
  /sbin/ksyms                          -> $(SEC_CRIT) ;
  /sbin/lsmod                          -> $(SEC_CRIT) ;
  #/sbin/mailconf                       -> $(SEC_CRIT) ;
  /sbin/mkfs.reiserfs                  -> $(SEC_CRIT) ;
  #/sbin/modemconf                      -> $(SEC_CRIT) ;
  /sbin/modprobe                       -> $(SEC_CRIT) ;
  /sbin/mount.ncp                      -> $(SEC_CRIT) ;
  /sbin/mount.ncpfs                    -> $(SEC_CRIT) ;
  /sbin/mount.smb                      -> $(SEC_CRIT) ;
  /sbin/mount.smbfs                    -> $(SEC_CRIT) ;
  #/sbin/netconf                        -> $(SEC_CRIT) ;
  /sbin/pidof                          -> $(SEC_CRIT) ;
  /sbin/poweroff                       -> $(SEC_CRIT) ;
  /sbin/quotaoff                       -> $(SEC_CRIT) ;
  /sbin/raid0run                       -> $(SEC_CRIT) ;
  /sbin/raidhotadd                     -> $(SEC_CRIT) ;
  /sbin/raidhotgenerateerror           -> $(SEC_CRIT) ;
  /sbin/raidhotremove                  -> $(SEC_CRIT) ;
  /sbin/raidstop                       -> $(SEC_CRIT) ;
  /sbin/rdump                          -> $(SEC_CRIT) ;
  /sbin/rdump.static                   -> $(SEC_CRIT) ;
  /sbin/reboot                         -> $(SEC_CRIT) ;
  /sbin/rmmod                          -> $(SEC_CRIT) ;
  /sbin/rrestore                       -> $(SEC_CRIT) ;
  /sbin/rrestore.static                -> $(SEC_CRIT) ;
  /sbin/swapoff                        -> $(SEC_CRIT) ;
  /sbin/telinit                        -> $(SEC_CRIT) ;
  #/sbin/userconf                       -> $(SEC_CRIT) ;
  #/sbin/uucpconf                       -> $(SEC_CRIT) ;
  #/sbin/vregistry                      -> $(SEC_CRIT) ;
  /bin/awk                             -> $(SEC_CRIT) ;
  /bin/bash2                           -> $(SEC_CRIT) ;
  /bin/bsh                             -> $(SEC_CRIT) ;
  /bin/csh                             -> $(SEC_CRIT) ;
  /bin/dnsdomainname                   -> $(SEC_CRIT) ;
  /bin/domainname                      -> $(SEC_CRIT) ;
  /bin/ex                              -> $(SEC_CRIT) ;
  /bin/gtar                            -> $(SEC_CRIT) ;
  /bin/nisdomainname                   -> $(SEC_CRIT) ;
  /bin/red                             -> $(SEC_CRIT) ;
  /bin/rvi                             -> $(SEC_CRIT) ;
  /bin/rview                           -> $(SEC_CRIT) ;
  /bin/view                            -> $(SEC_CRIT) ;
  /bin/ypdomainname                    -> $(SEC_CRIT) ;
}


  #########################
 #                       ##
######################### #
#                       # #
# Temporary directories # #
#                       ##
#########################
(
  rulename = "Temporary directories",
  recurse = false,
  severity = $(SIG_LOW)
)
{
  /usr/tmp                             -> $(SEC_INVARIANT) ;
  /var/tmp                             -> $(SEC_INVARIANT) ;
  /tmp                                 -> $(SEC_INVARIANT) ;
}

  ###############
 #             ##
############### #
#             # #
# Local files # #
#             ##
###############
(
  rulename = "User binaries",
  severity = $(SIG_MED)
)
{
  /sbin                                -> $(SEC_BIN) (recurse = 1) ;
  /usr/bin                             -> $(SEC_BIN) (recurse = 1) ;
  /usr/sbin                            -> $(SEC_BIN) (recurse = 1) ;
  /usr/local/bin                       -> $(SEC_BIN) (recurse = 1) ;
}

(
  rulename = "Shell Binaries",
  severity = $(SIG_HI)
)
{
  /bin/bash                            -> $(SEC_BIN) ;
  /bin/ksh                             -> $(SEC_BIN) ;
  # /bin/psh                             -> $(SEC_BIN) ; # No longer used?
  # /bin/Rsh                             -> $(SEC_BIN) ; # No longer used?
  /bin/sh                              -> $(SEC_BIN) ;
  # /bin/shell                           -> $(SEC_SUID) ; # No longer used?
  # /bin/tsh                             -> $(SEC_BIN) ; # No longer used?
  /bin/tcsh                            -> $(SEC_BIN) ;
  /sbin/nologin                        -> $(SEC_BIN) ;
}

(
  rulename = "Security Control",
  severity = $(SIG_HI)
)
{
  /etc/group                           -> $(SEC_CRIT) ;
  /etc/security                        -> $(SEC_CRIT) ;
  #/var/spool/cron/crontabs             -> $(SEC_CRIT) ; # Uncomment when this file exists
}

#(
#  rulename = "Boot Scripts",
#  severity = $(SIG_HI)
#)
#{
#  /etc/rc                              -> $(SEC_CONFIG) ;
#  /etc/rc.bsdnet                       -> $(SEC_CONFIG) ;
#  /etc/rc.dt                           -> $(SEC_CONFIG) ;
#  /etc/rc.net                          -> $(SEC_CONFIG) ;
#  /etc/rc.net.serial                   -> $(SEC_CONFIG) ;
#  /etc/rc.nfs                          -> $(SEC_CONFIG) ;
#  /etc/rc.powerfail                    -> $(SEC_CONFIG) ;
#  /etc/rc.tcpip                        -> $(SEC_CONFIG) ;
#  /etc/trcfmt.Z                        -> $(SEC_CONFIG) ;
#}

(
  rulename = "Login Scripts",
  severity = $(SIG_HI)
)
{
  /etc/bashrc                          -> $(SEC_CONFIG) ;
  /etc/csh.cshrc                       -> $(SEC_CONFIG) ;
  /etc/csh.login                       -> $(SEC_CONFIG) ;
  /etc/inputrc                         -> $(SEC_CONFIG) ;
  # /etc/tsh_profile                     -> $(SEC_CONFIG) ; #Uncomment when this file exists
  /etc/profile                         -> $(SEC_CONFIG) ;
}

# Libraries
(
  rulename = "Libraries",
  severity = $(SIG_MED)
)
{
  /usr/lib                             -> $(SEC_BIN) ;
  /usr/local/lib                       -> $(SEC_BIN) ;
}


  ######################################################
 #                                                    ##
###################################################### #
#                                                    # #
# Critical System Boot Files                         # #
# These files are critical to a correct system boot. # #
#                                                    ##
######################################################

(
  rulename = "Critical system boot files",
  severity = $(SIG_HI)
)
{
     /boot                             -> $(SEC_CRIT) ;
     #/sbin/devfsd                      -> $(SEC_CRIT) ;
     /sbin/grub                        -> $(SEC_CRIT) ;
     /sbin/grub-install                -> $(SEC_CRIT) ;
     /sbin/grub-md5-crypt              -> $(SEC_CRIT) ;
     /sbin/installkernel               -> $(SEC_CRIT) ;
     /sbin/lilo                        -> $(SEC_CRIT) ;
     /sbin/mkkerneldoth                -> $(SEC_CRIT) ;
     !/boot/System.map ;
     !/boot/module-info ;
     /usr/share/grub/i386-redhat/e2fs_stage1_5      -> $(SEC_CRIT) ;
     /usr/share/grub/i386-redhat/fat_stage1_5       -> $(SEC_CRIT) ;
     /usr/share/grub/i386-redhat/ffs_stage1_5       -> $(SEC_CRIT) ;
     /usr/share/grub/i386-redhat/minix_stage1_5     -> $(SEC_CRIT) ;
     /usr/share/grub/i386-redhat/reiserfs_stage1_5  -> $(SEC_CRIT) ;
     /usr/share/grub/i386-redhat/stage1             -> $(SEC_CRIT) ;
     /usr/share/grub/i386-redhat/stage2             -> $(SEC_CRIT) ;
     /usr/share/grub/i386-redhat/vstafs_stage1_5    -> $(SEC_CRIT) ;
     # other boot files may exist.  Look for:
     #/ufsboot                          -> $(SEC_CRIT) ;
}
   ##################################################
  ###################################################
  # These files change every time the system boots ##
  ##################################################
(
  rulename = "System boot changes",
  severity = $(SIG_HI)
)
{
     !/var/run/ftp.pids-all ; # Comes and goes on reboot.
     !/root/.enlightenment ;
     /dev/log                          -> $(SEC_CONFIG) ;
     /dev/cua0                         -> $(SEC_CONFIG) ;
     # /dev/printer                      -> $(SEC_CONFIG) ; # Uncomment if you have a printer device
     /dev/console                      -> $(SEC_CONFIG) -u ; # User ID may change on console login/logout.
     /dev/tty1                         -> $(SEC_CONFIG) ; # tty devices
     /dev/tty2                         -> $(SEC_CONFIG) ; # tty devices
     /dev/tty3                         -> $(SEC_CONFIG) ; # are extremely
     /dev/tty4                         -> $(SEC_CONFIG) ; # variable
     /dev/tty5                         -> $(SEC_CONFIG) ;
     /dev/tty6                         -> $(SEC_CONFIG) ;
     /dev/urandom                      -> $(SEC_CONFIG) ;
     /dev/initctl                      -> $(SEC_CONFIG) ;
     /var/lock/subsys                  -> $(SEC_CONFIG) ;
     #/var/lock/subsys/amd              -> $(SEC_CONFIG) ;
     /var/lock/subsys/anacron          -> $(SEC_CONFIG) ;
     /var/lock/subsys/apmd             -> $(SEC_CONFIG) ;
     #/var/lock/subsys/arpwatch         -> $(SEC_CONFIG) ;
     /var/lock/subsys/atd              -> $(SEC_CONFIG) ;
     /var/lock/subsys/autofs           -> $(SEC_CONFIG) ;
     #/var/lock/subsys/bcm5820          -> $(SEC_CONFIG) ;
     #/var/lock/subsys/bgpd             -> $(SEC_CONFIG) ;
     #/var/lock/subsys/bootparamd       -> $(SEC_CONFIG) ;
     #/var/lock/subsys/canna            -> $(SEC_CONFIG) ;
     /var/lock/subsys/crond            -> $(SEC_CONFIG) ;
     #/var/lock/subsys/cWnn             -> $(SEC_CONFIG) ;
     #/var/lock/subsys/dhcpd            -> $(SEC_CONFIG) ;
     #/var/lock/subsys/firewall         -> $(SEC_CONFIG) ;
     #/var/lock/subsys/freeWnn          -> $(SEC_CONFIG) ;
     #/var/lock/subsys/gated            -> $(SEC_CONFIG) ;
     /var/lock/subsys/gpm              -> $(SEC_CONFIG) ;
     #/var/lock/subsys/httpd            -> $(SEC_CONFIG) ;
     #/var/lock/subsys/identd           -> $(SEC_CONFIG) ;
     #/var/lock/subsys/innd             -> $(SEC_CONFIG) ;
     /var/lock/subsys/ipchains         -> $(SEC_CONFIG) ;
     #/var/lock/subsys/iptables         -> $(SEC_CONFIG) ;
     #/var/lock/subsys/ipvsadm          -> $(SEC_CONFIG) ;
     #/var/lock/subsys/irda             -> $(SEC_CONFIG) ;
     #/var/lock/subsys/iscsi            -> $(SEC_CONFIG) ;
     #/var/lock/subsys/isdn             -> $(SEC_CONFIG) ;
     #/var/lock/subsys/junkbuster       -> $(SEC_CONFIG) ;
     #/var/lock/subsys/kadmin           -> $(SEC_CONFIG) ;
     /var/lock/subsys/keytable         -> $(SEC_CONFIG) ;
     #/var/lock/subsys/kprop            -> $(SEC_CONFIG) ;
     #/var/lock/subsys/krb524           -> $(SEC_CONFIG) ;
     #/var/lock/subsys/krb5kdc          -> $(SEC_CONFIG) ;
     /var/lock/subsys/kudzu            -> $(SEC_CONFIG) ;
     #/var/lock/subsys/kWnn             -> $(SEC_CONFIG) ;
     #/var/lock/subsys/ldap             -> $(SEC_CONFIG) ;
     #/var/lock/subsys/linuxconf        -> $(SEC_CONFIG) ;
     #/var/lock/subsys/lpd              -> $(SEC_CONFIG) ;
     #/var/lock/subsys/mars_nwe         -> $(SEC_CONFIG) ;
     #/var/lock/subsys/mcserv           -> $(SEC_CONFIG) ;
     #/var/lock/subsys/mysqld           -> $(SEC_CONFIG) ;
     #/var/lock/subsys/named            -> $(SEC_CONFIG) ;
     /var/lock/subsys/netfs            -> $(SEC_CONFIG) ;
     /var/lock/subsys/network          -> $(SEC_CONFIG) ;
     #/var/lock/subsys/nfs              -> $(SEC_CONFIG) ;
     /var/lock/subsys/nfslock          -> $(SEC_CONFIG) ;
     #/var/lock/subsys/nscd             -> $(SEC_CONFIG) ;
     #/var/lock/subsys/ntpd             -> $(SEC_CONFIG) ;
     #/var/lock/subsys/ospf6d           -> $(SEC_CONFIG) ;
     #/var/lock/subsys/ospfd            -> $(SEC_CONFIG) ;
     /var/lock/subsys/pcmcia           -> $(SEC_CONFIG) ;
     /var/lock/subsys/portmap          -> $(SEC_CONFIG) ;
     #/var/lock/subsys/postgresql       -> $(SEC_CONFIG) ;
     #/var/lock/subsys/pxe              -> $(SEC_CONFIG) ;
     #/var/lock/subsys/radvd            -> $(SEC_CONFIG) ;
     /var/lock/subsys/random           -> $(SEC_CONFIG) ;
     #/var/lock/subsys/rarpd            -> $(SEC_CONFIG) ;
     /var/lock/subsys/reconfig         -> $(SEC_CONFIG) ;
     /var/lock/subsys/rhnsd            -> $(SEC_CONFIG) ;
     #/var/lock/subsys/ripd             -> $(SEC_CONFIG) ;
     #/var/lock/subsys/ripngd           -> $(SEC_CONFIG) ;
     #/var/lock/subsys/routed           -> $(SEC_CONFIG) ;
     #/var/lock/subsys/rstatd           -> $(SEC_CONFIG) ;
     #/var/lock/subsys/rusersd          -> $(SEC_CONFIG) ;
     #/var/lock/subsys/rwalld           -> $(SEC_CONFIG) ;
     #/var/lock/subsys/rwhod            -> $(SEC_CONFIG) ;
     /var/lock/subsys/sendmail         -> $(SEC_CONFIG) ;
     #/var/lock/subsys/smb              -> $(SEC_CONFIG) ;
     #/var/lock/subsys/snmpd            -> $(SEC_CONFIG) ;
     #/var/lock/subsys/squid            -> $(SEC_CONFIG) ;
     /var/lock/subsys/sshd             -> $(SEC_CONFIG) ;
     /var/lock/subsys/syslog           -> $(SEC_CONFIG) ;
     #/var/lock/subsys/tux              -> $(SEC_CONFIG) ;
     #/var/lock/subsys/tWnn             -> $(SEC_CONFIG) ;
     #/var/lock/subsys/ups              -> $(SEC_CONFIG) ;
     #/var/lock/subsys/vncserver        -> $(SEC_CONFIG) ;
     #/var/lock/subsys/wine             -> $(SEC_CONFIG) ;
     /var/lock/subsys/xfs              -> $(SEC_CONFIG) ;
     /var/lock/subsys/xinetd           -> $(SEC_CONFIG) ;
     /var/lock/subsys/ypbind           -> $(SEC_CONFIG) ;
     #/var/lock/subsys/yppasswdd        -> $(SEC_CONFIG) ;
     #/var/lock/subsys/ypserv           -> $(SEC_CONFIG) ;
     #/var/lock/subsys/ypxfrd           -> $(SEC_CONFIG) ;
     #/var/lock/subsys/zebra            -> $(SEC_CONFIG) ;
     /var/run                          -> $(SEC_CONFIG) ;
     /var/log                          -> $(SEC_CONFIG) ;
     /etc/ioctl.save                   -> $(SEC_CONFIG) ;
     /etc/issue.net                    -> $(SEC_CONFIG) -i ; # Inode number changes
     /etc/issue                        -> $(SEC_CONFIG) ;
     /etc/mtab                         -> $(SEC_CONFIG) -i ; # Inode number changes on any mount/unmount
     /lib/modules                      -> $(SEC_CONFIG) ;
     /etc/.pwd.lock                    -> $(SEC_CONFIG) ;
     # /lib/modules/preferred            -> $(SEC_CONFIG) ; #Uncomment when this file exists
}

# These files change the behavior of the root account
(
  rulename = "Root config files",
  severity = 100
)
{
     /root                             -> $(SEC_CRIT) ; # Catch all additions to /root
     #/root/.Xresources                 -> $(SEC_CONFIG) ;
     /root/.bashrc                     -> $(SEC_CONFIG) ;
     /root/.bash_profile               -> $(SEC_CONFIG) ;
     /root/.bash_logout                -> $(SEC_CONFIG) ;
     /root/.cshrc                      -> $(SEC_CONFIG) ;
     /root/.tcshrc                     -> $(SEC_CONFIG) ;
     /root/Mail                        -> $(SEC_CONFIG) ;
     #/root/mail                        -> $(SEC_CONFIG) ;
     #/root/.amandahosts                -> $(SEC_CONFIG) ;
     #/root/.addressbook.lu             -> $(SEC_CONFIG) ;
     #/root/.addressbook                -> $(SEC_CONFIG) ;
     /root/.bash_history               -> $(SEC_CONFIG) ;
     /root/.elm                        -> $(SEC_CONFIG) ;
     #/root/.esd_auth                   -> $(SEC_CONFIG) ;
     /root/.gnome_private              -> $(SEC_CONFIG) ;
     /root/.gnome-desktop              -> $(SEC_CONFIG) ;
     /root/.gnome                      -> $(SEC_CONFIG) ;
     /root/.ICEauthority               -> $(SEC_CONFIG) ;
     #/root/.mc                         -> $(SEC_CONFIG) ;
     #/root/.pinerc                     -> $(SEC_CONFIG) ;
     /root/.sawfish                    -> $(SEC_CONFIG) ;
     /root/.Xauthority                 -> $(SEC_CONFIG) -i ; # Changes Inode number on login
     #/root/.xauth                      -> $(SEC_CONFIG) ;
     /root/.xsession-errors            -> $(SEC_CONFIG) ;
}

  ################################
 #                              ##
################################ #
#                              # #
# Critical configuration files # #
#                              ##
################################
(
  rulename = "Critical configuration files",
  severity = $(SIG_HI)
)
{
     #/etc/conf.linuxconf               -> $(SEC_BIN) ;
     /etc/crontab                      -> $(SEC_BIN) ;
     /etc/cron.hourly                  -> $(SEC_BIN) ;
     /etc/cron.daily                   -> $(SEC_BIN) ;
     /etc/cron.weekly                  -> $(SEC_BIN) ;
     /etc/cron.monthly                 -> $(SEC_BIN) ;
     /etc/default                      -> $(SEC_BIN) ;
     /etc/fstab                        -> $(SEC_BIN) ;
     /etc/exports                      -> $(SEC_BIN) ;
     /etc/group-                       -> $(SEC_BIN) ;  # changes should be infrequent
     /etc/host.conf                    -> $(SEC_BIN) ;
     /etc/hosts.allow                  -> $(SEC_BIN) ;
     /etc/hosts.deny                   -> $(SEC_BIN) ;
     /etc/httpd/conf                   -> $(SEC_BIN) ;  # changes should be infrequent
     /etc/protocols                    -> $(SEC_BIN) ;
     /etc/services                     -> $(SEC_BIN) ;
     /etc/rc.d/init.d                  -> $(SEC_BIN) ;
     /etc/rc.d                         -> $(SEC_BIN) ;
     /etc/mail.rc                      -> $(SEC_BIN) ;
     /etc/modules.conf                 -> $(SEC_BIN) ;
     /etc/motd                         -> $(SEC_BIN) ;
     /etc/named.conf                   -> $(SEC_BIN) ;
     /etc/passwd                       -> $(SEC_CONFIG) ;
     /etc/passwd-                      -> $(SEC_CONFIG) ;
     /etc/profile.d                    -> $(SEC_BIN) ;
     /var/lib/nfs/rmtab                -> $(SEC_BIN) ;
     /usr/sbin/fixrmtab                -> $(SEC_BIN) ;
     /etc/rpc                          -> $(SEC_BIN) ;
     /etc/sysconfig                    -> $(SEC_BIN) ;
     /etc/samba/smb.conf               -> $(SEC_CONFIG) ;
     #/etc/gettydefs                    -> $(SEC_BIN) ;
     /etc/nsswitch.conf                -> $(SEC_BIN) ;
     /etc/yp.conf                      -> $(SEC_BIN) ;
     /etc/hosts                        -> $(SEC_CONFIG) ;
     /etc/xinetd.conf                  -> $(SEC_CONFIG) ;
     /etc/inittab                      -> $(SEC_CONFIG) ;
     /etc/resolv.conf                  -> $(SEC_CONFIG) ;
     /etc/syslog.conf                  -> $(SEC_CONFIG) ;
}

  ####################
 #                  ##
#################### #
#                  # #
# Critical devices # #
#                  ##
####################
(
  rulename = "Critical devices",
  severity = $(SIG_HI),
  recurse = false
)
{
     /dev/kmem                         -> $(Device) ;
     /dev/mem                          -> $(Device) ;
     /dev/null                         -> $(Device) ;
     /dev/zero                         -> $(Device) ;
     /proc/devices                     -> $(Device) ;
     /proc/net                         -> $(Device) ;
     /proc/sys                         -> $(Device) ;
     /proc/cpuinfo                     -> $(Device) ;
     /proc/modules                     -> $(Device) ;
     /proc/mounts                      -> $(Device) ;
     /proc/dma                         -> $(Device) ;
     /proc/filesystems                 -> $(Device) ;
     /proc/pci                         -> $(Device) ;
     /proc/interrupts                  -> $(Device) ;
     /proc/driver/rtc                  -> $(Device) ;
     /proc/ioports                     -> $(Device) ;
     #/proc/scsi                        -> $(Device) ;
     /proc/kcore                       -> $(Device) ;
     /proc/self                        -> $(Device) ;
     /proc/kmsg                        -> $(Device) ;
     /proc/stat                        -> $(Device) ;
     /proc/ksyms                       -> $(Device) ;
     /proc/loadavg                     -> $(Device) ;
     /proc/uptime                      -> $(Device) ;
     /proc/locks                       -> $(Device) ;
     /proc/version                     -> $(Device) ;
     /proc/mdstat                      -> $(Device) ;
     /proc/meminfo                     -> $(Device) ;
     /proc/cmdline                     -> $(Device) ;
     /proc/misc                        -> $(Device) ;
}

# Rest of critical system binaries
(
  rulename = "OS executables and libraries",
  severity = $(SIG_HI)
)
{
     /bin                              -> $(SEC_BIN) ;
     /lib                              -> $(SEC_BIN) ;
}

#=============================================================================
#
# Copyright 2000 Tripwire, Inc. Tripwire is a registered trademark of Tripwire,
# Inc. in the United States and other countries. All rights reserved.
#
# Linux is a registered trademark of Linus Torvalds.
#
# UNIX is a registered trademark of The Open Group.
#
#=============================================================================
#
# Permission is granted to make and distribute verbatim copies of this document
# provided the copyright notice and this permission notice are preserved on all
# copies.
#
# Permission is granted to copy and distribute modified versions of this
# document under the conditions for verbatim copying, provided that the entire
# resulting derived work is distributed under the terms of a permission notice
# identical to this one.
#
# Permission is granted to copy and distribute translations of this document
# into another language, under the above conditions for modified versions,
# except that this permission notice may be stated in a translation approved by
# Tripwire, Inc.
#
# DCM
#
# $Id: twpol-GENERIC.txt,v 1.1 2003/06/08 02:00:06 pherman Exp $
#
